We offer high-precision lathe machining using next-generation machinery, such as motorised lathes and multi-tasking machining centres. Our technological equipment and experienced team enables us to manage any project, even the most complex, for companies from a variety of sectors. We can meet specific needs, ensuring quality and precision at every stage of production.
ø200 x 1000
ø200 x 1000
Equipped with advanced technological equipment, we can offer lathe machining of the highest precision. 1 motorised lathe and 1 Integrex multitasking machining centre enable us to handle any project, regardless of its complexity.
We manufacture components with diameters up to 220 mm and lengths up to 1000 mm, with the highest quality and precision always guaranteed. Our consolidated experience enables us to operate successfully in complex industries such as engineering, aeronautics, shipbuilding, chemical and many others. Each project is carefully managed by our qualified staff, who monitor every stage of production to ensure flawless results.
We can perform all required turning processes, regardless of the project’s complexity, providing not only state-of-the-art machinery but also in-depth technical expertise.
If you’re looking for a reliable mechanical turning partner for precision machining, contact us. You will have access to the best machinery and a specialised team ready to respond to all your company’s needs, both nationally and internationally.
We work for over 120 clients in Italy and abroad. We do this both as a supplier for a specific series of parts and as a collaborative partner in the design and production phase, leveraging all our experience and expertise. Do you have a job in mind?
CNC turning is a machining process where the workpiece rotates and the tool removes material. It’s ideal for cylindrical components (shafts, bushings, rings, pins, seats) and, in general, for parts with rotational symmetry. It’s the right choice when you need repeatability, precision, and stable production across multiple parts.
To quote quickly and accurately, these are usually enough: a 3D file (STEP/IGES) + a 2D drawing (PDF/DXF) with dimensions and tolerances + information about material, quantity, and required finish. (If you don’t have a 3D file, it’s often possible to start from the 2D drawing, but 3D speeds things up significantly.)
Tolerances depend on the material, geometry, lengths, surface finish, and the inspections required. A key point: tighter tolerances increase cost and lead time, so it’s best to keep tight tolerances only on functional dimensions and use standard tolerances elsewhere.
CNC turning is typically available for prototypes as well as small/medium batches. What changes is setup time, machine time, and inspection requirements. If someone is looking for “single-part CNC turning” or “small batches”: it’s possible, but the cost-effectiveness improves with repetition.
CNC turning commonly covers aluminum alloys, steels, stainless steels, brass/copper, titanium, and other engineering materials. Material choice affects tooling, parameters, finishes, and cycle times.
In addition to the “machining” finish, deburring, mechanical finishes and, when required, process treatments/finishes can be provided (depending on specifications and supply chain). In CNC machining, finish and requirements also influence process choice and setup.
Dipende soprattutto da complessità, disponibilità materiale, finitura e controlli. Online you often find “typical” windows in days/1–2 weeks, but the correct answer for a service page is: it is defined based on the design and quantity, because setup and controls vary greatly.
-Use tight tolerances only where needed (functional dimensions)
-Avoid geometries that require multiple re-setups/repositioning
-Specify quantity, material, finish, and priorities upfront (lead time vs cost vs precision)
Leave a message telling us about your project, otherwise we can call you back, no obligation.
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
Sponsor di BTF TEAM
E: info@ozmeccanica.com
Subscribe to the newsletter
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
