Oz Meccanica specializes in
precision mechanical milling, for both standard and custom projects.
We work in small and medium series and pay the utmost attention to every stage of the process.
1020 x 500 x 510
1660 x 600 x 650
1740 x 600 x 650
5 assi ø630
1020 x 500 x 510
1660 x 530 x 610
5 assi ø500
2 machines available with dimensions ø600 x 350
We can determine the type of CNC milling best suited to your needs and manage the entire process in the best possible way, up to delivery.
We have state-of-the-art 5-axis machinery at our disposal, allowing us to reduce work times and create extremely precise projects.
For years we have been producing precision mechanics capable of satisfying the needs of all types of customers. If you want to talk to us about your project, do not hesitate to contact us, we will find the best possible solution together.
We work for over 120 clients in Italy and abroad. We do this both as a supplier for a specific series of parts and as a collaborative partner in the design and production phase, leveraging all our experience and expertise. Do you have a job in mind?
CNC milling removes material from a raw block to create surfaces, pockets, slots, holes, and 3D geometries. It’s suitable for plates, brackets, supports, housings/covers, prismatic components, and parts that require machining on multiple faces.
In short: 5-axis (or indexed 3+2) is helpful for complex geometries, off-axis holes, non-orthogonal surfaces, or when you want to reduce setups and improve tool accessibility. 3-axis is often more cost-effective for simpler parts and standard volumes.
Typically: a STEP/IGES 3D file + a dimensioned PDF (tolerances, surface roughness if required), plus material, quantity, and required finish. If there are mating fits, it’s best to indicate the datum strategy as well (GD&T if already available).
They are defined based on the geometry and the function of the part. A key note for anyone searching “CNC milling tolerances”: tighter tolerances affect cost and lead time, so it’s best to apply them only where they are truly needed.
Yes. CNC milling is often chosen for prototyping and pre-series because it starts from CAD files and doesn’t require molds. Cost-effectiveness then improves with repetition and setup optimization.
Typical guidelines: avoid features that are too small relative to available tools, use consistent internal radii, reduce the number of re-setups, and clearly define critical surfaces. Design-for-milling guides (3/5-axis) strongly emphasize these points
Leave a message telling us about your project, otherwise we can call you back, no obligation.
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
Sponsor di BTF TEAM
E: info@ozmeccanica.com
Subscribe to the newsletter
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
O.Z. S.r.l. unipersonale
Via Cooperativa del Lavoro, 23
31043 Fontanelle (TV)
P.IVA e C.F. 04158730269
